How to install thermal silicone sheet

Installation of thermal conductivity materials is also a part of the work of many electronic equipment manufacturers, because thermal conductivity materials are an indispensable part of various electronic equipment. Only after the correct installation of thermal conductivity materials, can the radiator play a greater role in heat dissipation, and the efficiency of heat dissipation will be greatly improved. Here we will talk about the installation method and precautions of the thermal conductive silicone sheet which are more used in the heat dissipation materials, so as to facilitate you to have a more comprehensive understanding of the thermal conductive silicone sheet and its installation method.

1, before installation

When installing the thermal conductive silicone sheet, it is necessary to carry out a detailed inspection of the surface of the installed component. The main thing is to ensure that the surface is clean and dust-free. In this way, the heat conduction effect can be ensured to achieve the best. When taking the thermal conductive silicone sheet, especially the large area of the thermal conductive silicone sheet, we try to use the hand from the middle part to grasp, so that we can try to avoid the deformation of the material due to the uneven force around, so as to ensure the integrity of the thermal conductive silicone sheet.

2, installation

There will be a protective film on both sides of the hot silicone sheet, so the protective film needs to be torn off manually during the installation process. It should be noted here that we should try not to uncover the protective film on both sides at the same time, tear off one side and then gently put down the thermal conductive silicone sheet, pay attention to the time to be careful about the generation of bubbles, if the bubble will affect the thermal conductivity effect. After determining the position and placing it, you can tear off the protective film on the other side, and then put the radiator on it. It should be noted that if there is a bubble in the process of installation, it can be slowly opened and re-placed, but the process must be slow.

3. After installation

The thermal conductive silicone sheet needs to be placed on the radiator after the installation, after the radiator is placed, it is best to press the radiator hard for a while, so as to ensure that the thermal conductive silicone sheet and the surface of the radiator are fully combined, and it also plays a fixed role. If there are conditions, the heat sink and heat conduction materials can also be pressed and stored for a period of time, so as to ensure that the position of the two is fixed.